SiriusXM XDNX1V1 User's Guide download pdf (Page 29)

marked with “SRS” logos. Be careful not to crimp or cut the cable.

5 Bring the cable out from the trim near the front of the cabin and

route it under the carpet toward the dashboard or console. Coil any

excess cable in a hidden location, such as under the carpet, keeping

it away from any vehicle pedals or controls. Secure the excess cable

with wire ties (purchased separately).

6 Bring the end of the cable out at the PowerConnect Vehicle Dock

location. Leave yourself enough cable so you can easily connect it to

the antenna connector of the dock.

7 Continue with “Step 5: Connect the Magnetic Mount Antenna and

PowerConnect Power Adapter” on page 34.

Sedan/Coupe With Antenna Placed at the Front of the Roof

1 Feed the antenna cable from the antenna underneath the rubber

molding around the windshield. Use a blunt plastic putty knife or

similar blunt tool to lift the rubber molding around the windshield

and tuck the antenna cable underneath the molding. Route the

antenna cable around and down the windshield to the lowest point.

2 At the lowest corner of the windshield, route the cable out of the

windshield molding and into

the rubber weather stripping

around the door opening.

Lift the weather stripping

from the opening and tuck

the cable inside it, then

replace the weather stripping.

Run the cable inside of the

weather stripping to the

Vehicle Installation

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 93 94

No comments

SiriusXM XDNX1V1 User's Guide Page 29