SiriusXM XDNX1V1 User's Guide download pdf (Page 67)

an FM channel that allows you to hear XM clearly.

2 Manually tune through your local FM channels

Manually tune through your local FM channels on your vehicle’s

FM radio. Turn on your vehicle’s FM radio. Start at 88.1 and use the

‘Manual’ tune function on your vehicle’s FM radio to tune through each

FM channel one-by-one (88.1 followed by 88.3 etc.) to locate channels

that aren’t being used by a local FM radio station. Write down each

FM channel that has only static or silence on it, until you reach 107.9.

Once you have created your list of available FM channels, you will

need to find the one that provides the best match for Onyx.

Tune Onyx to a favorite XM channel (or to channel 1, if it’s not

activated). Pick the first FM channel on your list and tune the FM radio

to that channel. Then tune Onyx to the same FM channel. (Refer to

“Set and Select an FM Channel” on page 69.) You should hear the

XM channel through your vehicle’s radio. If you are satisfied with the

sound quality, you’re done! If this FM channel doesn’t work well for

you, work down the list until you find an FM channel that allows you to

hear XM clearly.

NOTE! You may ﬁnd an FM channel with static or silence that does not

work with Onyx. It is possible that some type of inaudible interference is

present that prevents reception of the XM broadcast. Your only options are

to use another FM channel or a different audio connection method.

TIP! If you regularly drive from one location to another, such as your daily

commute, you may need to use different FM channels along your route for

best performance. If this is the case, we recommend saving the best FM

channels as presets on your FM radio and Onyx. Then you simply select

and match the best channel for the area you are in.

Conﬁguring Your Onyx

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 93 94

No comments

SiriusXM XDNX1V1 User's Guide Page 67