SiriusXM XADH2 User's Guide download pdf (Page 16)

In or Line In connection of your stereo system, using the provided Stereo

Audio Cable.

1. Take the provided Stereo Audio Cable and connect the single 1/8” (3.5

mm) connector to the green AUDIO connector at the rear of the Home

Dock.

2. Connect the white left and red right Stereo Audio Cable connectors (“L”

and “R” are also on each respective tip) to any available input other than

PHONO on your stereo system. (If your stereo’s inputs are marked red

and black, simply connect the white plug to the black input.)

3. Turn the stereo system On, and make sure you select the correct input

on your stereo system for the Aux In or Line In connection.

4. If you have connected everything correctly, and you are receiving

signal, you should hear the SiriusXM audio.

5. The audio level of your Radio can also be adjusted, if necessary.

Refer to your Radio’s User Guide (go to www.siriusxm.com/guides)

for instructions on how to adjust the audio level. The installation is

complete.

ANTAUDIO POWER

Home Installation

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

No comments

SiriusXM XADH2 User's Guide Page 16